marlin model 1895
12-20-2009, 09:19 PM
#1
Typical Buck
Thread Starter
Join Date: May 2005
Location: northern colorado
Posts: 749
marlin model 1895
Just got done shooting my 1895 for the first time. Man I love it! Shot some winchester 350 grain through it. Really, the kick wasnt bad. It was accurate right from the box and the only caveat was the rear sight. I cant see it al that well. Other than that, shoot, fit and finish are great! EJ
12-21-2009, 04:45 AM
#2
Nontypical Buck
Join Date: Aug 2005
Location: S.W. Pa.-- Heart in North Central Pa. mountains-
Posts: 2,600
Do you handload?? I've been shooting the 350 gr. Hornady FP thru mine. The gun loves them...and you're right....although not the recoil of a .243, it is certainly manageable with proper rests and form. Mine is currently wearing a Leupy VX II, but I have a Ghost Ring for it. Don't know if I'll put it on or not. It was my intent all along just to work up a good load with the scope on it, and then go to the open sight but I'm having a hard time telling myself to take the scope off..
12-22-2009, 02:26 PM
#4
Nontypical Buck
Join Date: Aug 2005
Location: S.W. Pa.-- Heart in North Central Pa. mountains-
Posts: 2,600
...................Not sure. As I said in another post, I've not yet chronographed that load yet. I think bigcountry was fooling with that bullet in his gun for awhile...Maybe he can give some numbers.....
12-31-2009, 10:19 AM
#5
Nontypical Buck
Join Date: Mar 2004
Posts: 2,445
I believe you can safely load the Marlin 1985 45/70 to get over 2000 fps with 350 grain bullets. Hodgdon's website has some loads. Hornady LeverEvolution in 350 grain are over 2000 fps if my memory is correct.
Just checked, there are a few loads for 350 grain bullets over 2000 fps, up to about 2300.
Just checked, there are a few loads for 350 grain bullets over 2000 fps, up to about 2300.
Last edited by UncleNorby; 12-31-2009 at 10:51 AM.
