Community
Firearm Review Forum Rifles, shotguns, blackpowder, pistols, etc... read the latest reviews of hot new firearms here.

Encore Center Fire

Thread Tools
 
Old 09-15-2005 | 09:34 PM
  #1  
Thread Starter
 
Joined: Mar 2005
Posts: 171
Likes: 0
Default Encore Center Fire

I like the idea of all the optionsfor the Encore but how are they when it comes to accuracy with center fire barrels. What do you guys think? Another option is buying H&R rifles for the same price as th T/C barrels.
J Bolt 7mm is offline  
Reply
Old 09-16-2005 | 05:16 AM
  #2  
Nontypical Buck
 
Joined: Feb 2003
Posts: 2,984
Likes: 0
From: MB.
Default RE: Encore Center Fire

I’ve heard lots on how the T/C Encore is a tack driver, however I have one and have never been successful in accuracy with mine.
trailer is offline  
Reply
Old 09-16-2005 | 06:27 AM
  #3  
fatsbucknut's Avatar
Typical Buck
 
Joined: Sep 2004
Posts: 829
Likes: 0
From: Mifflin Co. Pa
Default RE: Encore Center Fire

I absolutely love mine. I have a 50. cal inline, 22-250 and a .300 win mag barrels. Each one is very accurate and i think the quality of gun is better with the encore, to me the H&R's feel cheap. Not saying that they wont kill a deer cause i've witnessed them doing so.

Zach
fatsbucknut is offline  
Reply
Old 09-16-2005 | 06:38 AM
  #4  
bronko22000's Avatar
Boone & Crockett
 
Joined: Jan 2004
Posts: 12,823
Likes: 5
From: Eastern PA
Default RE: Encore Center Fire

I too had an encore in 7-08 and couldn't get it to shoot that well. Traded it in on a Browning Micro Hunter in same chambering. That Encore was sent to T/C twice and still couldn't shoot. My Contender shoots very good with all barrels but not that Encore.
I see a lot of people using them on TV but I had no luck with mine.
bronko22000 is offline  
Reply
Old 09-16-2005 | 05:42 PM
  #5  
Nontypical Buck
 
Joined: Feb 2003
Posts: 2,984
Likes: 0
From: MB.
Default RE: Encore Center Fire

bronko, you want to buy a T/C Encore. I know were you could get one for a good price
trailer is offline  
Reply
Old 09-25-2005 | 11:45 AM
  #6  
Typical Buck
 
Joined: Apr 2004
Posts: 982
Likes: 0
From: Central Michigan
Default RE: Encore Center Fire

My dad and I have Thompson Contenders. My dad put a 24" factory heavy barrel .223 on his and it will touch holes at 100 yards with a few different handloads. It will shoot .5 MOA with cheap winchester factory loads.
Gundigest is offline  
Reply
Old 09-25-2005 | 07:01 PM
  #7  
Fork Horn
 
Joined: Dec 2003
Posts: 395
Likes: 0
From: New Mexico
Default RE: Encore Center Fire

I've not had a problem one with my Encore. Other than trying to find a set of mounts that dont hang over the end of the chamber. I have about a inch of air under my base.

I just ended up going with the T/C Bases. Which still have a air gap under them, but it does'nt seem to bother my zero any.

hunter338.
hunter338 is offline  
Reply
Old 09-27-2005 | 09:27 AM
  #8  
quiksilver's Avatar
Giant Nontypical
 
Joined: Feb 2003
Posts: 5,716
Likes: 0
Default RE: Encore Center Fire

Varmint Al's website sings the praises of the Encore.

I've heard, however, that T/C's factory barrels are not as accurate as some of the other custom barrel-makers (Virgin Valley, Lilja, etc.)

Just google "encore barrels," and you'll find a few others. It's my understanding that when an encore frame is strapped to a heavy, custom fluted barrel, that it will shoot the lights out. I have no experience personally.

My next gun purchase will probably be a SSEncore frame.
quiksilver is offline  
Reply
Old 09-28-2005 | 12:50 PM
  #9  
 
Joined: Sep 2005
Posts: 37
Likes: 0
From: Fauquier, Virginia
Default RE: Encore Center Fire

I have a Stainless Encore in 270 Win (24 inch Stainless Barrel) and it shoots great. Below is a target I shot today from 150 yards, prone, shooting over my day-pack.



My Encore seems to prefer the Federal, but as always it could be my shooting .

Jim
tray999 is offline  
Reply
Old 10-27-2005 | 06:39 PM
  #10  
 
Joined: Oct 2005
Posts: 13
Likes: 0
From:
Default RE: Encore Center Fire

I have an Encore .223, and it is accurate. I did do a trigger job and some other tuning. Try Mike Bellm's website for some good information about the Encores - the forums there are informative. It's a fun rifle to shoot.

www.bellmtcs.com
TNFarmer is offline  
Reply


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.