HuntingNet.com Forums

HuntingNet.com Forums (https://www.huntingnet.com/forum/)
-   Firearm Review Forum (https://www.huntingnet.com/forum/firearm-review-forum-33/)
-   -   Encore Center Fire (https://www.huntingnet.com/forum/firearm-review-forum/113013-encore-center-fire.html)

J Bolt 7mm 09-15-2005 09:34 PM

Encore Center Fire
 
I like the idea of all the optionsfor the Encore but how are they when it comes to accuracy with center fire barrels. What do you guys think? Another option is buying H&R rifles for the same price as th T/C barrels.

trailer 09-16-2005 05:16 AM

RE: Encore Center Fire
 
I’ve heard lots on how the T/C Encore is a tack driver, however I have one and have never been successful in accuracy with mine.

fatsbucknut 09-16-2005 06:27 AM

RE: Encore Center Fire
 
I absolutely love mine. I have a 50. cal inline, 22-250 and a .300 win mag barrels. Each one is very accurate and i think the quality of gun is better with the encore, to me the H&R's feel cheap. Not saying that they wont kill a deer cause i've witnessed them doing so.

Zach

bronko22000 09-16-2005 06:38 AM

RE: Encore Center Fire
 
I too had an encore in 7-08 and couldn't get it to shoot that well. Traded it in on a Browning Micro Hunter in same chambering. That Encore was sent to T/C twice and still couldn't shoot. My Contender shoots very good with all barrels but not that Encore.
I see a lot of people using them on TV but I had no luck with mine.

trailer 09-16-2005 05:42 PM

RE: Encore Center Fire
 
bronko, you want to buy a T/C Encore. I know were you could get one for a good price

Gundigest 09-25-2005 11:45 AM

RE: Encore Center Fire
 
My dad and I have Thompson Contenders. My dad put a 24" factory heavy barrel .223 on his and it will touch holes at 100 yards with a few different handloads. It will shoot .5 MOA with cheap winchester factory loads.

hunter338 09-25-2005 07:01 PM

RE: Encore Center Fire
 
I've not had a problem one with my Encore. Other than trying to find a set of mounts that dont hang over the end of the chamber. I have about a inch of air under my base.

I just ended up going with the T/C Bases. Which still have a air gap under them, but it does'nt seem to bother my zero any.

hunter338.

quiksilver 09-27-2005 09:27 AM

RE: Encore Center Fire
 
Varmint Al's website sings the praises of the Encore.

I've heard, however, that T/C's factory barrels are not as accurate as some of the other custom barrel-makers (Virgin Valley, Lilja, etc.)

Just google "encore barrels," and you'll find a few others. It's my understanding that when an encore frame is strapped to a heavy, custom fluted barrel, that it will shoot the lights out. I have no experience personally.

My next gun purchase will probably be a SSEncore frame.

tray999 09-28-2005 12:50 PM

RE: Encore Center Fire
 
I have a Stainless Encore in 270 Win (24 inch Stainless Barrel) and it shoots great. Below is a target I shot today from 150 yards, prone, shooting over my day-pack.



My Encore seems to prefer the Federal, but as always it could be my shooting ;).

Jim

TNFarmer 10-27-2005 06:39 PM

RE: Encore Center Fire
 
I have an Encore .223, and it is accurate. I did do a trigger job and some other tuning. Try Mike Bellm's website for some good information about the Encores - the forums there are informative. It's a fun rifle to shoot.

www.bellmtcs.com


All times are GMT -8. The time now is 12:06 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.