Comments On This B-Head?
02-26-2007 | 09:57 PM
#1
Thread Starter
Dominant Buck
Joined: Feb 2005
Posts: 26,323
Likes: 0
From: WC FL
02-27-2007 | 06:21 AM
#4
Typical Buck
Joined: Dec 2006
Posts: 974
Likes: 0
From: Canning, Ontario. Canada
RE: Comments On This B-Head?
I'll try them.. I think the website looks cool, that has to count for something.
The guy who started the thread on the other site is an accuracy junkie, he will soon be telling us what the scoop is..
The guy who started the thread on the other site is an accuracy junkie, he will soon be telling us what the scoop is..
02-27-2007 | 06:43 AM
#5
Typical Buck
Joined: Feb 2003
Posts: 604
Likes: 0
From: Ontario Canada
RE: Comments On This B-Head?
ORIGINAL: Pydpiper
I'll try them.. I think the website looks cool, that has to count for something.
The guy who started the thread on the other site is an accuracy junkie, he will soon be telling us what the scoop is..
I'll try them.. I think the website looks cool, that has to count for something.
The guy who started the thread on the other site is an accuracy junkie, he will soon be telling us what the scoop is..
Check your local regulations as I understand many other areas have the same requirements that Ontario has.
02-27-2007 | 06:51 AM
#6
Typical Buck
Joined: Dec 2006
Posts: 974
Likes: 0
From: Canning, Ontario. Canada
RE: Comments On This B-Head?
From the Ontario hunting regulation summary:
"There must be at least two cutting edges of straight, sharp, unserrated barbless steel."
OK, well that answers that..[:@]
*edit* Good call GrumpyTom, that saved me a bit of embarassement and a fine.. See, your not so grumpy after all..
"There must be at least two cutting edges of straight, sharp, unserrated barbless steel."
OK, well that answers that..[:@]
*edit* Good call GrumpyTom, that saved me a bit of embarassement and a fine.. See, your not so grumpy after all..
02-27-2007 | 10:37 AM
#7
Thread Starter
Dominant Buck
Joined: Feb 2005
Posts: 26,323
Likes: 0
From: WC FL
RE: Comments On This B-Head?
ORIGINAL: Piedpiper
From the Ontario hunting regulation summary:
"There must be at least two cutting edges of straight, sharp, unserrated barbless steel."
OK, well that answers that..[:@]
*edit* Good call Grumpy Tom, that saved me a bit of embarrassment and a fine.. See, your not so grumpy after all..
From the Ontario hunting regulation summary:
"There must be at least two cutting edges of straight, sharp, unserrated barbless steel."
OK, well that answers that..[:@]
*edit* Good call Grumpy Tom, that saved me a bit of embarrassment and a fine.. See, your not so grumpy after all..
Oh David, you forgot to mention, they have to be all Steel! You cannot use the Full Meatal Jacket, which is made of Aluminum.