Comments On This B-Head?
 

http://www.spintite.com/hyperspeed.html

RE: Comments On This B-Head?
 

yea i was reading bout those on the other site, they look sweettttt......

RE: Comments On This B-Head?
 

Neet.....you buy em I'll try em...;):D...

RE: Comments On This B-Head?
 

I'll try them.. I think the website looks cool, that has to count for something.:D
The guy who started the thread on the other site is an accuracy junkie, he will soon be telling us what the scoop is..

RE: Comments On This B-Head?
 

I believe that in Ontario here heads would be illegal. Blade have to be Straight, or unschraided edges. From what I see there, are the blades have a curve and or a talon type tip to it. A few years ago a MNR officer told me that basically (general rule of thumb) if the head did not have a straight & smooth blade, if was not allowed for use in Ontario.

Check your local regulations as I understand many other areas have the same requirements that Ontario has.

RE: Comments On This B-Head?
 

From the Ontario hunting regulation summary:

"There must be at least two cutting edges of straight, sharp, unserrated barbless steel."

OK, well that answers that..[:@]

*edit* Good call GrumpyTom, that saved me a bit of embarassement and a fine.. See, your not so grumpy after all..:D

RE: Comments On This B-Head?
 

Yep! The back edges have to be 90* to the ferrule and or the shaft! That's 2 counts against the Magnus "Buzz Cut".... What a shame!:)Oh David, you forgot to mention, they have to be all Steel! You cannot use the Full Meatal Jacket, which is made of Aluminum.:)

RE: Comments On This B-Head?
 

Garbage in, Garbage out.

RE: Comments On This B-Head?
 

Nah, Nah, Nah....Explain ,Please?:)

RE: Comments On This B-Head?
 

Dan is saying in one ear out the other.

If it works, don't fix it.