help me find old style glue in points for thin carbon shafts
12-13-2004, 08:21 PM
#1
Nontypical Buck
Thread Starter
Join Date: Apr 2004
Posts: 3,236
help me find old style glue in points for thin carbon shafts
I shoot the older style thin carbons that come with the outserts. I don't use the outserts though. I have Wasp broadheads that attach with compression rings. I am looking for the old style field tips that have the pin that you can snap off sections of it to adjust grain weight. They glue in but the point itself fits over the shaft. I am having a bit of trouble finding these. If anyone knows a source, I would greatly appreciate it. I would also be interested in the Wasp broadheads to purchase too but I do have enough to last for now. If and when these are no longer available I am looking at the new Easton Axis system as an alternative. I prefer thin shafts. The thinner the better, for wind drift that is.
12-13-2004, 08:33 PM
#2
Boone & Crockett
Join Date: Oct 1998
Location: Hughesville, PA USA
Posts: 18,322
RE: help me find old style glue in points for thin carbon shafts
livbucks, I know exactly the points your thinking of and I in fact have just a few from the old days of shooting the thin poltruded bemans myself.....I'm not exactly sure of a source but I will also check.....
12-13-2004, 08:54 PM
#3
Boone & Crockett
Join Date: Oct 1998
Location: Hughesville, PA USA
Posts: 18,322
RE: help me find old style glue in points for thin carbon shafts
If I'm remembering correctly, they are an Easton product, check here...
http://www.keystonecountrystore.com/....asp?dept=1046
http://www.keystonecountrystore.com/....asp?dept=1046
12-14-2004, 06:19 PM
#7
Nontypical Buck
Join Date: Feb 2003
Location: Arlington TX USA
Posts: 2,214
RE: help me find old style glue in points for thin carbon shafts
Liv Bucks, I might can hook you up. I have some of the inserts you are talking about that I'd gladly give away just to get them out of my tackle box. I used to shoot Bemans when they first came out but haven't shot them in years. PM me and I'll send them to you to see if they'll work. If not, then at least they're out of my tackle box. 
12-14-2004, 07:53 PM
#8
Nontypical Buck
Thread Starter
Join Date: Apr 2004
Posts: 3,236
RE: help me find old style glue in points for thin carbon shafts
ORIGINAL: Rob/PA Bowyer
If I'm remembering correctly, they are an Easton product, check here...
http://www.keystonecountrystore.com/....asp?dept=1046
If I'm remembering correctly, they are an Easton product, check here...
http://www.keystonecountrystore.com/....asp?dept=1046
I looked there and many of the ones that could be the right one have no picture available. Maybe I will call them to find out more.
Thanks again!
12-15-2004, 09:18 AM
#10
Boone & Crockett
Join Date: Feb 2003
Posts: 10,679
RE: help me find old style glue in points for thin carbon shafts
I've got a ton of those old points at the shop. I'll look and see if I have any for the 60/ 80. I am sure I do. If so I'll PM you and send them your way.