help me find old style glue in points for thin carbon shafts
 

I shoot the older style thin carbons that come with the outserts. I don't use the outserts though. I have Wasp broadheads that attach with compression rings. I am looking for the old style field tips that have the pin that you can snap off sections of it to adjust grain weight. They glue in but the point itself fits over the shaft. I am having a bit of trouble finding these. If anyone knows a source, I would greatly appreciate it. I would also be interested in the Wasp broadheads to purchase too but I do have enough to last for now. If and when these are no longer available I am looking at the new Easton Axis system as an alternative. I prefer thin shafts. The thinner the better, for wind drift that is.

RE: help me find old style glue in points for thin carbon shafts
 

livbucks, I know exactly the points your thinking of and I in fact have just a few from the old days of shooting the thin poltruded bemans myself.....I'm not exactly sure of a source but I will also check.....

RE: help me find old style glue in points for thin carbon shafts
 

If I'm remembering correctly, they are an Easton product, check here...

http://www.keystonecountrystore.com/....asp?dept=1046

[Deleted]
 

[Deleted by Admins]

RE: help me find old style glue in points for thin carbon shafts
 

Try Lancaster Archery Supplies.

RE: help me find old style glue in points for thin carbon shafts
 

Beman hunter 60/80. Maybe someone can help with the O.D. measurement

RE: help me find old style glue in points for thin carbon shafts
 

Liv Bucks, I might can hook you up. I have some of the inserts you are talking about that I'd gladly give away just to get them out of my tackle box. I used to shoot Bemans when they first came out but haven't shot them in years. PM me and I'll send them to you to see if they'll work. If not, then at least they're out of my tackle box. :D

RE: help me find old style glue in points for thin carbon shafts
 

Thanks Rob for the link.
I looked there and many of the ones that could be the right one have no picture available. Maybe I will call them to find out more.
Thanks again!

[Deleted]
 

[Deleted by Admins]

RE: help me find old style glue in points for thin carbon shafts
 

I've got a ton of those old points at the shop. I'll look and see if I have any for the 60/ 80. I am sure I do. If so I'll PM you and send them your way.