HuntingNet.com Forums

HuntingNet.com Forums (https://www.huntingnet.com/forum/)
-   Bowhunting (https://www.huntingnet.com/forum/bowhunting-18/)
-   -   The Best Mechanical (https://www.huntingnet.com/forum/bowhunting/77676-best-mechanical.html)

3 Shot 11-01-2004 07:35 PM

The Best Mechanical
 
Ok, with my recent failure of finding a nice buck I shot with a NAP Spitfire, I am doubting them.......

They seem unusually hard to open, and seem to get poor penetration even when compared to other mechanical heads, and another thing, is they cost at least $7 more than say a Rocky Mtn. Snyper.

So I am on the quest for some new mechanicals, if I can't find a good mechanical I have some Muzzy's sitting around.

I have heard good things about Rocket Mechnicals, and the Rocky Mtn. Snypers, but I wanted to get your guys opinions on them or other mechanical heads.

Thanks,

Jeff

Deleted User 11-01-2004 07:46 PM

[Deleted]
 
[Deleted by Admins]

Ken/WV 11-01-2004 09:24 PM

RE: The Best Mechanical
 
I have had very good success with the Nap Spitfires, Nap Scoprion XP's, and the Grim Reaper broadheads. All are very good...the only downfall is that the Nap Scorpion requires the small rubberbands....and the Spitfires and Grim Reapers don't.

HANKFAN 11-01-2004 09:33 PM

RE: The Best Mechanical
 
My vote is for the Scorpion XP's. I have used just about every mechanical out there and
I always end up with 4 Scorpion XP's in my quiver every November morning. I have 100% confidence in this head.

TFOX 11-01-2004 10:43 PM

RE: The Best Mechanical
 
The 2 you listed are the best for lower energy setups.


The Spitfire's are one of the worst for low energy setups.Over the years that I have been drifting in and out of this forum,that seems to be the biggest complaint about the Spitfires.I also have noticed many of the hunting shows that use them seem to never get a passthrough.Even with setups that you would think should have no problems.

5 shot 11-02-2004 02:33 AM

RE: The Best Mechanical
 
Most "broadhead failures" are really hunter failures. It's either bad shot placement, picking the wrong head for your individual setup or some other factor that the hunter did not consider. Spittfires will get the job done, but they do require more KE than many other heads. They have a large cut and open slower, therefore they tend to not penetrate as well as smaller heads. If you have plenty of KE it's not big deal, but if your "under gunned" or on the edge and you hit bone or have a hard quartering shot you may not get full penetration. In order to recommend a head for you I need to know more about your setup. Draw weight, length, arrow speed and weight if you know them. With this info we can make an informed choice on what broadhead would best suit your setup.

Rickmur 11-02-2004 02:37 AM

RE: The Best Mechanical
 
3shot, 5shot is the man on broadheads, welcome to the board.

Rich Baker 11-02-2004 05:31 AM

RE: The Best Mechanical
 
Just shoot thunderhead 125's and be done with it

PABowhntr 11-02-2004 05:58 AM

RE: The Best Mechanical
 
Despite the blade sharpness and short number of thread issues I will still offer up the Rocket Steelhead 100 as my personal favorite mechanical. Its short overall length, modest cutting diameter and one piece solid steel ferrule allow it to provide awesome penetration and very good entrance and exit wounds.

I took a buck and a doe this year with that head and am totally confident in its performance.

By most accounts the 125 grain version is even more reliable.

royak 11-02-2004 06:06 AM

RE: The Best Mechanical
 
I have used the Shockwave 100's for the past several years. I have never lost a deer and 99% have expired within 50 yds. I know I have taken at least 15 deer with them in fact I have taken 5 with the same head with only sharpening the blades. I love them . Give them a try you will really like them but as stated they are only as good as the archer behind them.


All times are GMT -8. The time now is 01:56 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.