gutshot

I'm having a problem with my Outback. Every time that I draw the two "spacers" that my bus cables hook to make a popping sound. I took the bow back to my proshop last week and he replaced the spacers for me but after about 70 shots the new ones are doing the same thing. Has anybody else had this problem and if you did how did you fix it?

jholtz7

GUTSHOT,

I have an Outback also(love it!), although I don't have this problem, maybe a drop of gun oil on each axle where the "spacers" attach will clear it up. If you're worried about scent they do have scentless gun oil, or I've heard of guys putting drop of corn/vegetable oil in place.

Hope this helps,

Jason

thenuge15

You need to take them off and sand them flat. Sometimes they have little imperfections.

Carwi

I had the same problem with my LX. I put a very small amount of lube on the axle at the QCC in this photo. DO NOT OVERLUBE OR GET LUBE ON THE CABLE ENDS. Less than a drop on each side will get rid of it permanently, at least I haven't heard the click since January.