TROPHY RIDGE PROBLEMS
#1
Thread Starter
Join Date: Feb 2003
Location: VABEACH VA USA
Posts: 20
TROPHY RIDGE PROBLEMS
LAST NIGHT I MOUNTED AND SHOT WITH THE NEW TROPHY RIDGE MATRIX SIGHT. I LOVE THE SIGHT PICTURE, BUT I HAD PROBLEMS WITH THE THUMB SCREWS COMING LOOSE. THEY MOVED 2-3 MINUTE MARKS AFTER ABOUT 15 ARROWS. BELIEVE ME WHEN I SAY I CRANKED THEM DOWN.HAS ANYBODY ELSE HAD A SIMILAR EXPERIENCE.
#4
Join Date: Feb 2003
Location: Delco PA USA
Posts: 15
RE: TROPHY RIDGE PROBLEMS
Is it that the screw actually came lose or did the bracket seem to "creep"?
I had an issue with the new Matrix where I had it cranked down but my verical bar kept creeping up. Called Trophy Ridge and was informed they had some that had machining problems and they sent me a replacement horizontal bar. Give them a call.
I had an issue with the new Matrix where I had it cranked down but my verical bar kept creeping up. Called Trophy Ridge and was informed they had some that had machining problems and they sent me a replacement horizontal bar. Give them a call.
#6
Join Date: Feb 2003
Location: Seattle, WA
Posts: 68
RE: TROPHY RIDGE PROBLEMS
I had the same problem PADavy mentioned and they sent the new horizontal bar in a few days. Guess some of them were machined to the wrong tolerances.
Locktight/tape/etc. will not help this problem - heck I used superglue and still had the problem
_________
SuperX
Locktight/tape/etc. will not help this problem - heck I used superglue and still had the problem
_________
SuperX
#7
RE: TROPHY RIDGE PROBLEMS
YES I HAD THE SAME PROBLEM I USED REGULAR SCREWS AND LOCKTIGHT AND IT SOLVED THE PROBLEM ITS A NICE SIGHT THAT YELLOW PIN WILL SHOW UP GREAT ON A 3D TARGET OR AN ANIMAL