TROPHY RIDGE PROBLEMS
 

LAST NIGHT I MOUNTED AND SHOT WITH THE NEW TROPHY RIDGE MATRIX SIGHT. I LOVE THE SIGHT PICTURE, BUT I HAD PROBLEMS WITH THE THUMB SCREWS COMING LOOSE. THEY MOVED 2-3 MINUTE MARKS AFTER ABOUT 15 ARROWS. BELIEVE ME WHEN I SAY I CRANKED THEM DOWN.HAS ANYBODY ELSE HAD A SIMILAR EXPERIENCE.

RE: TROPHY RIDGE PROBLEMS
 

I have had two Trophy Ridge sights and not had any problems. I may be defective. I would see if you could exchange it.

RE: TROPHY RIDGE PROBLEMS
 

Two things you may try, one is locktight, or fingernail polish. Put it on the threads, tighten them down and let it dry.

The Tazman

RE: TROPHY RIDGE PROBLEMS
 

Is it that the screw actually came lose or did the bracket seem to "creep"?
I had an issue with the new Matrix where I had it cranked down but my verical bar kept creeping up. Called Trophy Ridge and was informed they had some that had machining problems and they sent me a replacement horizontal bar. Give them a call.

[Deleted]
 

[Deleted by Admins]

RE: TROPHY RIDGE PROBLEMS
 

I had the same problem PADavy mentioned and they sent the new horizontal bar in a few days. Guess some of them were machined to the wrong tolerances.

Locktight/tape/etc. will not help this problem - heck I used superglue and still had the problem :)

_________
SuperX

RE: TROPHY RIDGE PROBLEMS
 

YES I HAD THE SAME PROBLEM I USED REGULAR SCREWS AND LOCKTIGHT AND IT SOLVED THE PROBLEM ITS A NICE SIGHT THAT YELLOW PIN WILL SHOW UP GREAT ON A 3D TARGET OR AN ANIMAL

RE: TROPHY RIDGE PROBLEMS
 

I had the same problem with mine .Call the company and they will send you new parts .

RE: TROPHY RIDGE PROBLEMS
 

Try using string wax on the screw's this will help if they are coming loose.

Nubo

RE: TROPHY RIDGE PROBLEMS
 

They had a recall on a particular batch off the production line, you probably got a one from there. They will fix it for you, just call them.