Is my arrow really heavy?
#71

ORIGINAL: TFOX
Even if an elk takes a step at 84 yards,he is still dead,he has a freaking kill zone the size of a satelite dish.An arrow will cover that distance in well under a second.
Deer move at 15 yards as much or more than an elk will at 80 if he is feeding and relaxed.
Everyone has THEIR ethics,stick to them and you will be an ethical hunter.
Even if an elk takes a step at 84 yards,he is still dead,he has a freaking kill zone the size of a satelite dish.An arrow will cover that distance in well under a second.
Deer move at 15 yards as much or more than an elk will at 80 if he is feeding and relaxed.
Everyone has THEIR ethics,stick to them and you will be an ethical hunter.

#72

ORIGINAL: MathewsShooter30
i do not know what spine of an arrow is????
I am shooting 65-70 draw weight and a 29.5 draw length with a 2005 Mathews LX bow...
With a 440 grain arrow it shot 265 something
what spine should I get? What arrow is suggested?
i do not know what spine of an arrow is????
I am shooting 65-70 draw weight and a 29.5 draw length with a 2005 Mathews LX bow...
With a 440 grain arrow it shot 265 something
what spine should I get? What arrow is suggested?
MS30.
What arrows are you currently using and what arrows is your Dad shooting.
#76

I shoot a similar bow to your Mathews and like my arrows around 425 grains.
I have XX75s 2219s that weigh over well over 500 grains and dont like the way they fly out of my bow. They are quiet though. My Axis 340s weigh about 425 and are quiet with good penetration. My Maxima 350s weigh about 375 and fly well and shoot flat but I notice they are a bit louder at the shot.
I use the Axis arrows most of the time and have tuned the bow and rest for those arrows. When I shoot the 2219s I use my 50 yard pin on 40 yard shots. When I shoot the Maximas at 40 yards I split the pins between the 30 and 50 yard pins.
No harm in getting a half dozen lighter carbons and giving them a try. Just make sure they are spined right.
I have XX75s 2219s that weigh over well over 500 grains and dont like the way they fly out of my bow. They are quiet though. My Axis 340s weigh about 425 and are quiet with good penetration. My Maxima 350s weigh about 375 and fly well and shoot flat but I notice they are a bit louder at the shot.
I use the Axis arrows most of the time and have tuned the bow and rest for those arrows. When I shoot the 2219s I use my 50 yard pin on 40 yard shots. When I shoot the Maximas at 40 yards I split the pins between the 30 and 50 yard pins.
No harm in getting a half dozen lighter carbons and giving them a try. Just make sure they are spined right.
#78
Banned
Join Date: Mar 2008
Posts: 1,701

what do you guys mean when you say "make sure there spined right"?
STATIC SPINE is the stiffness of the arrow and its resistance to bending. To determine statice spine, the arrow is supported a two points a known distance apart and a force is applied to the center of the distance, usually through a weight. The amount of displacement of the center point, how far it drops, determines the spine. Arrows with a high spine will not sag as much as arrows with a low spine.
With a compound, I liked shooting paper, that is, a large piece of paper set up to shoot your arrows through, maybe 5-10 yards from the shooter.
When you do this, your arrow SHOULD tear a "perfect" hole, right? It should punch a nice, pretty hole, with the fletching tears in the right place etc.
That's the goal, that's rarely where you'll start at.
Your arrows can rip/tear holes up, down, left and right, and its in large part due to arrow spine (assuming your rest is set up correctly)
Your arrows flex (archer's paradox) when you shoot - but there are some arrows that don't flex enough or flex too much, depending on spine.
You can affect the spine of your arrows by cutting them shorter ( increases spine, you're making them stiffer) or adding weight to the points (weakens the stiffness) or a variety of other ways too.
I'm shooting a recurve, fingers, instinctive, so paper shooting doesn't work well for me. For me, I shoot bare shaft, and I cut 1/2" at a time off new arrows, or I can add weight to the points by going from 125 gr points to 150 to 200 etc .... and there will be one spot (like right now I think I shoot 29 1/2" ICS400 shafts, weight tubes, 5" feathers, 100 gr inserts and 160 gr head) and they are GORGEOUS in flight.
Go to 125 grains up front instead of the 260 I have and I'v just stiffened up the arrow a LOT - and I won't get as good a flight as I did.
Your fletching will stabilize your arrows a LOT - however starting with arrows that fly really well and THEN adding the fletching is the way you really want to go.
There are a lot of spine charts that will give you an idea of where to start on arrow selection/choice
#79
Banned
Join Date: Mar 2008
Posts: 1,701

I use aluminum arrows still and had it weighed the other day... it weighs 510 grains!!![:@] I picked up over 30 feet per second shooting my dads 440 grain arrows!
And those 440 gr arrows with a nice 3 blade fixed head would have likely hit all over the place. Why?
Spine