How much will he score?

Reply Subscribe

Thread Tools

10-23-2008 | 12:51 PM

#11

monster6

Thread Starter

Spike

Joined: Jun 2008

Posts: 71

Likes: 0

From: Wisconsin

RE: How much will he score?

I will let you guys know all the real measurements when I get home. I dont want anyone to get annoyed by my missleading numbers, thanks a lot though guys. Will update later.

10-23-2008 | 12:54 PM

#12

Predator19

Joined: Sep 2005

Posts: 663

Likes: 0

From: East Central Ohio

RE: How much will he score?

My final guess is 94".

10-23-2008 | 01:32 PM

#13

Rick James

Nontypical Buck

Joined: May 2004

Posts: 4,679

Likes: 0

From: Albany, NY

RE: How much will he score?

I'm thinking you mean the tip to tip spread is 10 inches? Unless somehow the picture isn't scaled right, or the persone holding the horns is a midget.......I can't see how that's 10" for spread. The 10" tine you speak of is much shorter than the inside spread of the main beams.

The averageguy fist is around 4" across the knuckles. Knowing this, I'd say the deer isbetween 100-105 inches.

I figured the following measurements and came up with 104".........

MB - 19 19

H1 - 4 4
H2 - 3.53.5
H3 -3 3
H4 - 2.75 2.75

G1 - 22.5
G2 - 910

IS - 16"

Here is a 98" 6 pointer as reference.........

10-23-2008 | 01:34 PM

#14

kickin_buck

Nontypical Buck

Joined: Jan 2008

Posts: 1,559

Likes: 0

From: Southern Illinois

RE: How much will he score?

Quote:

ORIGINAL: Matt / PA

Wow if those are the real measurements that kid in the picture is really throwing off my perspective.
LOL

With your numbers he's only going to score about 76-77".

10-23-2008 | 02:14 PM

#15

Schultzy

Giant Nontypical

Joined: Sep 2007

Posts: 9,445

Likes: 0

From: Central Minnesota

RE: How much will he score?

Quote:

ORIGINAL: monster6

This is only a rough estimate. im at work so i dont quite remember well but i do remember measuring and geting close to these measurments.

From base to tip = 14.5 inches both sides
1 brow=1 1/2
2nd brow = 2
base circumference= 2 inches. both sides

Lol!! I don't think you know where to measure on a rack. The H1 measurements are way off. You measure at the smallest point between the G1 and the burr at the smallest point. You wrap the tape all the way around the beam In the particular spot, not across It. There at the smallest 3.5", I'm thinking 4".

I figure this buck to be at about 100".