THINKING RAGE
03-17-2008 | 05:31 PM
#192
Boone & Crockett
Joined: Oct 1998
Posts: 18,322
Likes: 0
From: Hughesville, PA USA
RE: THINKING RAGE
ORIGINAL: mobow
Ok, I've heard statements such as these before. How can that be possible? I mean.....If the blades, fully deployed, are 2" wide.....How can it cut a 4" wide slice??
The Snypers have a 1.5" cutting diameter but the entrance holes I've had are usually 3" to 4" holes and the exit are usually 2" to 3".
Can't explain it, just the facts on all the ones I've taken, 3" 4" holes on a 1.5" 2 blade broadheads. And for the record, the shot was lower and more forward than I would have liked but a dead deer in 50 yards. [8D]
This was from a 1.5" Snyper.
03-17-2008 | 05:43 PM
#194
Dominant Buck
Joined: Oct 2005
Posts: 21,043
Likes: 0
From:
RE: THINKING RAGE
Look at it this way Don....(and calm down.....it makes PERFECT sense).......
Go get an arrow (BH tipped)and shoot it through a sheet of paper shooting straight-on(Paper tuning). Now.....shoot it at a 45deg angle. Which hole is bigger?
Go get an arrow (BH tipped)and shoot it through a sheet of paper shooting straight-on(Paper tuning). Now.....shoot it at a 45deg angle. Which hole is bigger?
03-17-2008 | 05:44 PM
#196
Joined: Mar 2004
Posts: 13,082
Likes: 0
From:
RE: THINKING RAGE
ORIGINAL: GMMAT
Look at it this way Don....(and calm down.....it makes PERFECT sense).......
Go get an arrow (BH tipped)and shoot it through a sheet of paper shooting straight-on(Paper tuning). Now.....shoot it at a 45deg angle. Which hole is bigger?
Look at it this way Don....(and calm down.....it makes PERFECT sense).......
Go get an arrow (BH tipped)and shoot it through a sheet of paper shooting straight-on(Paper tuning). Now.....shoot it at a 45deg angle. Which hole is bigger?
03-17-2008 | 05:46 PM
#197
Boone & Crockett
Joined: Oct 1998
Posts: 18,322
Likes: 0
From: Hughesville, PA USA
RE: THINKING RAGE
ORIGINAL: GMMAT
I don't think they're (Rage) bigger than 2" at any time.
I don't think they're (Rage) bigger than 2" at any time.
Okay, for mobow, I took pictures of my 1.5" Snypers.
As they open they snap out to nearly 2.5" and then fold back to 1.5".
Rage, working this exact same way must open to nearly 3" before locking back into their 2" position.
03-17-2008 | 06:12 PM
#198
Joined: Oct 2007
Posts: 3,965
Likes: 0
From: Southeast, Va
RE: THINKING RAGE
Ok, completely objective question here, I have no reason to care what anyone shoots, simply put, I like Muzzy, I think Muzzy are the best BH ever made... for me that is... the question...
isn't the wide blade 2" or better a little more difficult to achieve penetration unless you have very good KE?? I seriously have no clue here, I read this, and heard it from a pro shop, so, what is the deal with the wider cutting dia? I was even told that the Muzzy MX head was to wide...
isn't the wide blade 2" or better a little more difficult to achieve penetration unless you have very good KE?? I seriously have no clue here, I read this, and heard it from a pro shop, so, what is the deal with the wider cutting dia? I was even told that the Muzzy MX head was to wide...
03-17-2008 | 06:16 PM
#200
Boone & Crockett
Joined: Oct 1998
Posts: 18,322
Likes: 0
From: Hughesville, PA USA
RE: THINKING RAGE
ORIGINAL: Vabowman
Ok, completely objective question here, I have no reason to care what anyone shoots, simply put, I like Muzzy, I think Muzzy are the best BH ever made... for me that is... the question...
isn't the wide blade 2" or better a little more difficult to achieve penetration unless you have very good KE?? I seriously have no clue here, I read this, and heard it from a pro shop, so, what is the deal with the wider cutting dia? I was even told that the Muzzy MX head was to wide...
Ok, completely objective question here, I have no reason to care what anyone shoots, simply put, I like Muzzy, I think Muzzy are the best BH ever made... for me that is... the question...
isn't the wide blade 2" or better a little more difficult to achieve penetration unless you have very good KE?? I seriously have no clue here, I read this, and heard it from a pro shop, so, what is the deal with the wider cutting dia? I was even told that the Muzzy MX head was to wide...