changeing fletchs do i need to resight
10-26-2007 | 11:05 AM
#1
Thread Starter
Giant Nontypical
Joined: Sep 2005
Posts: 6,867
Likes: 0
changeing fletchs do i need to resight
if i buy new arrows sight it in with them with the factory ftetchs and install quikspins after sighting do i need to resight my bow with the quikspins
if i have the same arrow set up just changed the fletchs
if i have the same arrow set up just changed the fletchs
10-26-2007 | 11:14 AM
#2
Nontypical Buck
Joined: Jun 2007
Posts: 1,548
Likes: 0
From: Junction,Illinois(SE)
RE: changeing fletchs do i need to resight
I depends...I sighted my bow in this year with Factory Fletchings..but the other day I flecthed them with Blazers and they shot fast so I had to adjust my sight.
10-26-2007 | 11:20 AM
#3
Nontypical Buck
Joined: Aug 2003
Posts: 1,719
Likes: 0
From: Bessemer, MI
RE: changeing fletchs do i need to resight
Why wouldnt you refletch first, then sight in? Only makes sense..
Better yet, buy Bare Shafts.. Save money and no Stripping required..Just put your Quickspins on and call it good.. Make sure you clean your Shafts really good before glueing..
Better yet, buy Bare Shafts.. Save money and no Stripping required..Just put your Quickspins on and call it good.. Make sure you clean your Shafts really good before glueing..
10-26-2007 | 11:32 AM
#4
Nontypical Buck
Joined: Mar 2007
Posts: 4,911
Likes: 0
From: Minnesota
RE: changeing fletchs do i need to resight
ORIGINAL: Mathewsboy
Why wouldnt you refletch first, then sight in? Only makes sense..
Better yet, buy Bare Shafts.. Save money and no Stripping required..Just put your Quickspins on and call it good.. Make sure you clean your Shafts really good before glueing..
Why wouldnt you refletch first, then sight in? Only makes sense..
Better yet, buy Bare Shafts.. Save money and no Stripping required..Just put your Quickspins on and call it good.. Make sure you clean your Shafts really good before glueing..
10-26-2007 | 11:36 AM
#5
Thread Starter
Giant Nontypical
Joined: Sep 2005
Posts: 6,867
Likes: 0
RE: changeing fletchs do i need to resight
well what worried me about putting the quikspins on first is that there kinda they do not old up if they go through straw or get hit by another arrow which would cost another 20 bucks for new one then the 2 dollar an arrow to refletch i thought if i could just use the factory and save the 35 dollars or so
ORIGINAL: outdoormafiaKP
do this
ORIGINAL: Mathewsboy
Why wouldnt you refletch first, then sight in? Only makes sense..
Better yet, buy Bare Shafts.. Save money and no Stripping required..Just put your Quickspins on and call it good.. Make sure you clean your Shafts really good before glueing..
Why wouldnt you refletch first, then sight in? Only makes sense..
Better yet, buy Bare Shafts.. Save money and no Stripping required..Just put your Quickspins on and call it good.. Make sure you clean your Shafts really good before glueing..
10-26-2007 | 11:42 AM
#7
Thread Starter
Giant Nontypical
Joined: Sep 2005
Posts: 6,867
Likes: 0
RE: changeing fletchs do i need to resight
what wrong with useing the quikspins
ORIGINAL: Mathewsboy
besides the fact i do not wont to spend 35.00 ti sight them in with new arrows
Well.. Just use the factory and forget the quickspins... Shoot and Hunt with Factory..
besides the fact i do not wont to spend 35.00 ti sight them in with new arrows
Well.. Just use the factory and forget the quickspins... Shoot and Hunt with Factory..
10-26-2007 | 12:35 PM
#9
Fork Horn
Joined: Sep 2006
Posts: 371
Likes: 0
From:
RE: changeing fletchs do i need to resight
I have quikspins and I love them.. Do want YOU want to do. Don't shoot through straw if you don't want to "ruin" them. Go to walmart or something and pick up a cheap $15 target.
Thread
Thread Starter
Forum
Replies
Last Post
MATTHEWS
Bowhunting
12
07-18-2003 02:51 PM
