When it rains....It pours!!!
#11
At your size,I would give the Hoyt 38Pro a serious look.
Not a bash against any other bows but the Hoyt is built for someone of your stature.The limbs are laminated,not glass and it hasan available TRUE 32" draw.It has a straight riser and gives you over an 8" brace.

Not a bash against any other bows but the Hoyt is built for someone of your stature.The limbs are laminated,not glass and it hasan available TRUE 32" draw.It has a straight riser and gives you over an 8" brace.

#12
I know where a guy can buy a brand new hoyt trykon 60-70# for $425 shipped if you are interested. It also comes with the Hoyt acc kit. I seen it from someone local in Nebraska. It was basically taken out of the package and set up to try and shot only a few times.
#16
ORIGINAL: Matt / PA
I'm having trouble getting past......."Bought a 2006 Techunter for $65"[:-]
$65!? [:-][:-]
Why does that stuff never happen to me?
Anyway , what you describe is what is commonly referred to as a "feather". I'm not gonna tell you what to do,(I'll let Greg do that
) but if it were mine and it had no warranty like that bow I'd just snip that little snag off, put a drop of fletch cement on the edge to keep it from lifting further and shoot it til' the wheels fell off which would probably be somewhere around 2028. (You'd be due for a new bow by then anyway)
I'm having trouble getting past......."Bought a 2006 Techunter for $65"[:-]
$65!? [:-][:-]
Why does that stuff never happen to me?
Anyway , what you describe is what is commonly referred to as a "feather". I'm not gonna tell you what to do,(I'll let Greg do that
) but if it were mine and it had no warranty like that bow I'd just snip that little snag off, put a drop of fletch cement on the edge to keep it from lifting further and shoot it til' the wheels fell off which would probably be somewhere around 2028. (You'd be due for a new bow by then anyway)As for the feather, I just wouldn't feel right shooting it knowing it was there. It's one ofthe OCD's that I have. When I go into the woods I must have 100% confidnece in my equipment and that would send me over the edge![&:]I'd know it was there and I would be constantly checking it to make sure it was not getting bigger.......it would not be pretty...not at all.[
]No I will either replace the limbs or just sell it off as parts or to some one who is full aware of the "feather".
#17
ORIGINAL: TFOX
At your size,I would give the Hoyt 38Pro a serious look.
Not a bash against any other bows but the Hoyt is built for someone of your stature.The limbs are laminated,not glass and it hasan available TRUE 32" draw.It has a straight riser and gives you over an 8" brace.
At your size,I would give the Hoyt 38Pro a serious look.
Not a bash against any other bows but the Hoyt is built for someone of your stature.The limbs are laminated,not glass and it hasan available TRUE 32" draw.It has a straight riser and gives you over an 8" brace.
#18
Doesn't get much simpler than a hybrid.Haven't touched mine in about 2 years.Atleast the strings and cables as far as timing goes.
Set it and leave but each to his own.
Set it and leave but each to his own.
#19
ORIGINAL: Greg / MO
Check out the classifieds section; I might have something there you'd like
Check out the classifieds section; I might have something there you'd like
Same thing as the Hoyt, I don't want a hybrid cam system.I'm going to get a single cam bow, that I know for sure. I shot dual cam bows for years even when they went out of style. I just couldn't get on the single cam bandwagon. Oh, I shot a few and they were ok but nothing that made me want to change. Then I bought one and started to shoot it on a regular basis. The simple design really sold me on it as a hunting bow.
As with my move to single cams I am in the process of shooting some hybrid systems like my Oasis. I think they shoot great but I don't have the confidence in them as a primary hunting rig. I'm sure my opinion will change as the years go by and I shoot more and different types (like the binary cams) but for now I'm going to stick with what I feel the most comfortable with, a single cam.
#20
Bigj
You are definately welcome to your opinion but I can tell you that from experience,a single cam bow,WHEN MAINTAINED PROPERLY requires more hands on attention than ahybrid.Simple reason is when a cable or string stretches,iteffects the hybrid very little but on a single cam,it changes things like nock height and travel.
Granted,some of the newer 1 cams have VERY level nock travel so it has less of an effect on them but like I said,2 years without a single timing adjustment and still dead on.
BUT,the choice is totally yours and if you don't have the confidence in the hybrid,then it isn't for you.
You are definately welcome to your opinion but I can tell you that from experience,a single cam bow,WHEN MAINTAINED PROPERLY requires more hands on attention than ahybrid.Simple reason is when a cable or string stretches,iteffects the hybrid very little but on a single cam,it changes things like nock height and travel.
Granted,some of the newer 1 cams have VERY level nock travel so it has less of an effect on them but like I said,2 years without a single timing adjustment and still dead on.
BUT,the choice is totally yours and if you don't have the confidence in the hybrid,then it isn't for you.


