mobow

Do your top and bottom cams look like these? Is the bottom one off center?

hardcorehunter

Yes, it is the only way the bottom module will fit inside of the limb; it is what makes a Hoyt Vectrix superior to a mathews.

buckeye

Having offset cam spacingfrom top to bottom is something superior? You would think they would have shimmed the top cam to match the bottom cams spacing.....

Has anyone put a laser on one of these when setting their rest? If so did you check both the top and bottom cam?

hardcorehunter

My bow is timed perfect, paper tuned with a nice bullet hole, and grouping in a 50 cent piece shot after shot today at my dealers' 20 yd range. My wifes is too.

mobow

So is mine, but my rest is way off to the left, and my sight is maxed out left...

hardcorehunter

Don't know what to tell you Mobo. Wife and I just stripped our old bows at the dealer and put themon the Vectrix's. Black Gold Radiant sight, Trophy Taker.

Gut Check

Mo...I would suggest buying a Bowtech or Mathews. In all seriousness good luck with getting your sight and rest alignment fixed.

gibsonhoyt

I don't have any problem with mine! I get bullet holes too! TT Shaker, BG Flashpoint

mobow

I get bullet holes w/ mine as well, but my rest is WAY out of center shot to achieve it, and my sight is maxed out to the left....something isn't right, I just don't know what it is....

TFOX

Check the string tracking.I bet it runs vertical with the riser and NOT at an angle like alot of bows nowadays.



I havn't had a chance to play with the new cams but the regular cam 1/2 run vertical.

I just looked at my Xtec and it is shimmed the same and the string tracking is PERFECT.