I currently shoot 2315's at 27.25", but i think those are a little overspinned for me..
I shoot around 65 lbs, with a 29" draw. Mathews Q2.. Left handed. I use a muzzy zero effect, a peep sight (which i plan on getting rid of), and string silencers. I will be using a 100 grain head of some sort.. Most likely the new 4 blade muzzy.. I will also be possibly trying the new Blazers, or stick with my feathers of 4" or smaller.

I was thinking of carbon, but not sure..
I would like to get more speed, so i could shoot 0-30 with one pin and be only off a couple inches high or low after sighting in on the sweet spot.

So throw some ideas at me..
Thanks

Carbon, go w/ a 400.

Aluminum, 2213

Depends on what carbon, but i would also say a 400(depending on what weight head you are using). With Gold tip i would say a 5575, beman a 400. And why may i ask are you getting rid or the peep? I thought about the same thing a few years ago, then i got a much bigger peep(fletcher hunter peep), and the big apperature(spelling) let me still align my sight ring within my peep, almost like a rear sight on a rifle. Anyway, different story. Carbon is good, so is metal, if you switch though...I tried bemans and didn't like the covering or the straightness, CX shafts were not straight enough, easton carbon excels were good for the price( but they were pretty much easton's answer to the gold tip), so i started shooting Gold tips and won't change any time soon. Go with hunter XTs. Had the same dozen for 3 years.

Boy, will all the opinion on here these days, I thought for sure I'd rattle up more than 2 answers.. I'll give it 2 more days and see what happens..

Carbon 350 or 400 or 55/75

go with carbon you will get speed and strength probably a 350-400 grain arrow you'll have to look around to see what you like for sure there is plenty to choose from