RE: My Buck knife broke
 

I just put it on the bench grinder and re work the tip, making sure it doesn't get to hot and cooling it often.

RE: My Buck knife broke
 

Well,if they dont replace it,just grind a new tip on it,dont heat it up too much while grinding,keep dipping it inwater.If it gets to hot it will change the hardness. then resharpenit... and then use a buffing wheel on a dremel to polish. and ...you got your trusty Friend back.....Good luck

RE: My Buck knife broke
 

I'd say if you been usingit in that fashion for 20 years you've got your money out of it.
Not to sound crappy about this (it is your knife, do what you want with it) but this is a HUGE pet peave of mine when it comes to knives. It just amazes me that people expect their knife to perform tasks it is not meant to do, and when it fails, even though they've done the same thing with it many times over, they think it is somehow the knife's fault and therefore the manufacture should replace it.

Knives are for cutting; not chopping, chiseling, digging, screwing, pryingetc. (unless you're in an emergency/survival situation). I went through a lot of pocket knives when I was younger, and I remember I broke one while helping my Grandpa around the farm. For my birthday he replaced it and told me a knife is a tool, just like a hammer is for hammering, a knife is for cutting. If you use it for what it was designed for, it'll last you a lifetime. If you don't, you'll keep breakin' them. He was right.

Don't ask them to replace that knife. Buy a new one you like...and a pelvic saw.You're rightnot to complain - $50 for another Buck;if that one lasted that long doin' that, it is obviously a good bet.

Nevertheless, here is the website for Buck Warranty info. Buck is a good company and will probaby send you a new knife,but it clearly states that the warranty is only for defects in the materials for life - not misuse, which I would catagorize this as. http://www.buckknives.com/warranty.php

RE: My Buck knife broke
 

If you want to keep your knife and reuse it PM me and I will fix it for you.If you send it back I am sure they will replace it with a new one they are a great company ,but they will destroy your old one .
Do not try to grind & cool it with water you need to use hot oil to keep from making it brittle.

Take a look at Gerber's new knives they are all made in China.I refuse to pay American dollars for Chineese quality.Gerber was a great knife but not any more.

RE: My Buck knife broke
 

I did the exact same thing to a buck knife I have about 15yrs ago. I was trying to split the pelvis and the tip broke off. I had my unlce re-work the tip of the knife rounding it out some, and it is a great skinning knife now. After that I learned that you don't actually need to split the hock the majority of the time, and if you do...do it later with a better tool for the job. :eek:
I would keep the knife, and have someone re-work the tip however you like. If you sent it back, they would probably replace it, but that knife has alot of sentimental value, and in reality is probably better quality than what you would get back.

RE: My Buck knife broke
 

You can grind it and keep it cool with Water i am a Tool Maker ,and i have sharpened Thousands of knifes,cutters and blades of every sort for the last Twenty Years,,Hot Oil? what are making Fries???

RE: My Buck knife broke
 

I'm fairly confident that Buck would replace the knife, based on the philosophy of the company alone. I've decided not to but rather replace the knife with another Buck - one of those fancy dual blade/saw gut hook combo things.. argh argh argh!:D

Seriously, it wouldn't be right for me to ask them to replace their knife I've had for 20 years that I've abused, and resharpened many times only to perform flawlessly until now.I remember way back then reading this from the paper that came with the box:

If you are a new Buck knife owner, "welcome aboard." You are now part of a very large family. Although we're talking about a few million people, we still like to think of each one of our users as a member of the Buck Knives Family and take a personal interest in the product that was bought. With normal use, you should never have to buy another.
Now that you are family, you might like to know a little more about our organization. The fantastic growth of Buck Knives was no accident. From the beginning, management determined to make God the Senior Partner. In a crisis, the problem was turned over to Him, and He hasn't failed to help us with the answer. Each product must reflect the integrity of management, including our Senior Partner. If sometimes we fail on our end, because we are human, we find it imperative to do our utmost to make it right. Of course, to us, besides being Senior Partner, He is our Heavenly Father also; and it's a great blessing to us to have this security in these troubled times. If any of you are troubled or perplexed and looking for answers, may we invite you to look to Him, for God loves you.
"For God so loved the world that he gave His only begotten son; that whoever believeth in Him should not perish, but have everlasting life." John: 3:16


Yep, another Buck Knife for me. ;)

RE: My Buck knife broke
 

Wow, I never knew that about Buck...they'll get all my knife business just on that.

RE: My Buck knife broke
 

Hey dickweed what does the "o" stand for in O-1 ,"A" in A-2 or maybe you could tell me how to heat treat some 4140 annealed.Take a couple more metallurgy classes before you talk down to me about heat treating Tool Steels.

RE: My Buck knife broke
 

Yes Sir ,the "O" stands for Oil Hardened in O-1 and the A-stands forAir Hardened ,4140 is heat treated in a furnace to about 62- 64 Rockwell or you can buy it preheat treatedwhich can be around35 -40 Rockwell hardness,We do this everyday at my work...He is not trying to heat treat his knife,the water coolingis to keep the same temper as the rest of the blade as he grinds it,and not to change the monocular structure of the steel......... DICKWEED.;)