I need help with my Black Ice
#1
Thread Starter
Join Date: Jan 2007
Location:
Posts: 93
I need help with my Black Ice
I need some help. I got the 2007 Black Ice and I had the modules switched out to shorten my draw length from 29-27. I have realized that It is still a little long and want to know if I can get it any smaller. Do they have 26 inch modules. How would I get it down about a half inch.
#2
RE: I need help with my Black Ice
Before you deicde to purchase new modules I have a couple questions;
Are you shooting with a loop?
Could your loop be shortened some?
Can you try a release with a shorter head?
With your current release, is it possible for you to shorten the head by screwing it down some?
I would try these things first before purchasing a new module, especially if you're only a half-inch over drawn.
Are you shooting with a loop?
Could your loop be shortened some?
Can you try a release with a shorter head?
With your current release, is it possible for you to shorten the head by screwing it down some?
I would try these things first before purchasing a new module, especially if you're only a half-inch over drawn.
#3
Thread Starter
Join Date: Jan 2007
Location:
Posts: 93
RE: I need help with my Black Ice
Yes I am shooting with a loop. The modules dont cost me anything they just switch them out. I just didnt know if 27 was as short as they get. My loop is pretty small. They said there was a bump stop or something on the bow that can be moved to shorten the length a little bit.
#4
RE: I need help with my Black Ice
They said there was a bump stop or something on the bow that can be moved to shorten the length a little bit.
The reason being with each module you have to adjust the draw stop for the right let off %.
You can move the draw stop but it will effect the let of of the bow.