vapor shafts
#1
Nontypical Buck
Thread Starter
Join Date: Jan 2006
Location: Newtonville, Ontario, Canada
Posts: 3,896
vapor shafts
I did a search in this forum for vapor carbon shafts made by blackhawk and couldn't find anything. Has anyone used or heard of these? I've been to their website.
#2
RE: vapor shafts
Try this question over on www.archerytalk.com
I was shooting the 23 Speeds last year. More of a large diameter target and 3D arrow. They shot really well for me although the shafts I had deviated quite a bit from specs. Pretty much my opinion is that Vapors are a "middle of the road" arrow. Decent, far from junk like a few, but not top quality either.
The best arrows I've owned and shot over the last 30+ years are still my ACC's with my Gold Tips being very close to their equal. The only Easton all carbons that have impressed me (and I've shot them all) are the Litespeeds, here again a target arrow and not hunting.
I was shooting the 23 Speeds last year. More of a large diameter target and 3D arrow. They shot really well for me although the shafts I had deviated quite a bit from specs. Pretty much my opinion is that Vapors are a "middle of the road" arrow. Decent, far from junk like a few, but not top quality either.
The best arrows I've owned and shot over the last 30+ years are still my ACC's with my Gold Tips being very close to their equal. The only Easton all carbons that have impressed me (and I've shot them all) are the Litespeeds, here again a target arrow and not hunting.
#3
Join Date: Jul 2005
Location:
Posts: 107
RE: vapor shafts
They are great arrows.I have been shooting the for three years no problems.They are made by gold tip now.# is 330-793-3314 they will answer any questions you have.I shoot the 3000 series.I think that is as light as they make.
#6
Join Date: Feb 2003
Location: KY USA
Posts: 779
RE: vapor shafts
A decent arrow but not a great arrow, I am not sure how they will be now that Goldtip owns them. I shot the camo's, 23 speeds& the wood grain arrows. I think the woodgrain arrow is cool looking & it would be great for the traditional shooter since any decent carbon is straighter than most cedar shafts you can get today!
#7
RE: vapor shafts
I used to shoot gold tips myself. I switched to Carbon Force Radial X Weave Pro's last year. I am getting a little better groups at 50 yds. that w/ my GT's. might be my set up that favor's the X Weaves.
#9
Join Date: May 2005
Location: ATCO NEW JERSEY
Posts: 707
RE: vapor shafts
Actually they were bought out by Goldtip, I have been shooting them for a couple of years and can't complain and now thatGoldtip has purchasd them they will get even better... I have some '06 shafts for sale in the classified section....