What am I doing wrong?
#1
I tried to load my Firestorm yesterday with the T/C Shock Wave Sabots and the Mag Express Sabots, but couldn't get either to go down the barrel. I had to punch both back out of the end of the barrel.
I was using the 50 cal. 240gr and 250gr loads. I tried my Powerbelts and they went right down.
I was using the 50 cal. 240gr and 250gr loads. I tried my Powerbelts and they went right down.
#2
Ram there is another topic concerning the hard loading of the T/C Shock Waves. Right now it's near the bottom of this page. Titled My frist experience with the Shock Waves sucked.Maybe you can find your answer there.
Ruger Redhawk
Ruger Redhawk
#3
Nontypical Buck
Joined: Jul 2003
Posts: 2,922
Likes: 0
ram96
Those are .452 bullets with a thicker sabot. Go out and buy some .451 45/50 or .429 44/50 Nosler or Speer bulk bullets in 50 & 100 pks. Then buy a 50-pk of Harvester sabots. Others to buy are Harvester sabertooth bullets, Powerbelt bullets, Buffalo sabot/bullets, Hornady XTPs bulk in 429 or 451. These are sold fom 185-230 grains. Then there's Precision bullets (QTs & Dead Centers) at prbullet.com.
Those are .452 bullets with a thicker sabot. Go out and buy some .451 45/50 or .429 44/50 Nosler or Speer bulk bullets in 50 & 100 pks. Then buy a 50-pk of Harvester sabots. Others to buy are Harvester sabertooth bullets, Powerbelt bullets, Buffalo sabot/bullets, Hornady XTPs bulk in 429 or 451. These are sold fom 185-230 grains. Then there's Precision bullets (QTs & Dead Centers) at prbullet.com.




