Community
Black Powder Ask opinions of other hunters on new technology, gear, and the methods of blackpowder hunting.

Great Plains Hunter and conicals

Thread Tools
 
Old 07-19-2012 | 12:05 PM
  #1  
cayugad's Avatar
Thread Starter
Dominant Buck
 
Joined: Feb 2003
Posts: 21,193
Likes: 0
From: Wisconsin
Default Great Plains Hunter and conicals

Today was a very enjoyable day on the range. It looked like rain, and we could use it, but I knew the weather man was lying. So I decided to risk it and shoot.

Rifle: 50 caliber Lyman Great Plains Hunter 1-32 twist 32 inch barrel

Sights are primitive open sights. Buckhorn style. I have yet to adjust the rear sight for left or right but did file some of the front sight off to get the POI raised up.

I had great luck shooting 295 grain Powerbelts out of this rifle and so I picked up some Powerbelts that were on sale. BUT they are 348 grain. So I figured they would still shoot well.

I could not be more wrong. The powerbelts were all over the target. I started covering the holes with duct tape and then changed to just marking them with a red pen. The rifle was spraying them. Very strange.

So back in the house to see what I might shoot. It was then I spotted a whole bunch of Buffalo Bullets HP conical bullets in 385 grain. I decided I never had luck pushing them hard, so I decided to lower the powder charge to 60 grains of powder and see if that did not make them start to behave.



The powerbelts were not working but the conical bullets began to behave pretty good. Now I only had the target at 38 yards. That lawn mowing always messes me up. But that's fine. Open sights and that's a good distance for me. I know some of you long distance shooters scoff at that distance. But to me that is hunting distance.

The rifle was holding a good group. And I was swabbing between shots with pure isopropyl alcohol. Lots of fouling today for some reason. But with 60 grains of powder, this rifle was a real joy to shoot. No recoil, and it was working good. Ignition was very fast until the flint shattered in half. I replaced it, and then all was back in order.



I changed to a different part of the target and all was going good. It was holding a very good group although it was shooting 2 inches high. But I could adjust for that. Like that Blackhorn bottle picture. I held six o'clock on the picture and it just laid them in the top of the bottle.

But after a lot of shooting today it suddenly started to group to the right. Two hits side by side. I checked the sights and they were good and tight. So I wondered.. is the rifle dirty or am I just getting tired and hot? So I decided to stop for the day.

Cleaning the rifle I learned the truth of how dirty the rifle was. I turned the water bath dirty black so there was a lot of soot in the barrel. That might explain why the POI was starting to change. But we will see next time out. I want to try those conicals with 60 grains of 3f and see how they do. That would make a good deer load for me.
cayugad is offline  
Reply
Old 07-19-2012 | 01:51 PM
  #2  
bronko22000's Avatar
Boone & Crockett
 
Joined: Jan 2004
Posts: 12,823
Likes: 5
From: Eastern PA
Default

you sent a lot of lead down range Dave. Nice shooting.
Adn that 60 gr load is plenty for whitetail in my opinion.
bronko22000 is offline  
Reply
Old 07-19-2012 | 02:16 PM
  #3  
Nontypical Buck
 
Joined: Aug 2010
Posts: 1,672
Likes: 0
From: Anne Arrundle County, Maryland
Default

That much lead will knock the snot out of a deer for sure! And from the looks of that target you shouldn't have much trouble hitting one either. Good shooting.
pluckit is offline  
Reply
Old 07-19-2012 | 02:21 PM
  #4  
Semisane's Avatar
Boone & Crockett
 
Joined: Apr 2007
Posts: 10,918
Likes: 1
From: River Ridge, LA (Suburb of New Orleans)
Default

I agree. Sixty grains of black under a 385 grain chunk of lead will do the job as far out as you can hit. Good shooting Cayugad.

I sure envy your circumstances - being able to shoot at home. My guns keep begging for a trip to the range and don't understand when I tell them it TOO DARN HOT.
Semisane is offline  
Reply
Old 07-19-2012 | 03:18 PM
  #5  
cayugad's Avatar
Thread Starter
Dominant Buck
 
Joined: Feb 2003
Posts: 21,193
Likes: 0
From: Wisconsin
Default

I shot so much today, I emptied my pan flask primer and had to reload it. I have no idea how many shots I fired today as I changed a lot of targets. And now that I know the rifle likes these 385 grain conicals, I will be shooting it a lot more.
cayugad is offline  
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.