Very interesting finding!
#23
Nontypical Buck
Join Date: Aug 2008
Location: Rapid City, South Dakota
Posts: 3,732
Myself, i have found the Windex with vinegar causes rusting in my barrels. Try a different oil based cleaner for your barrel. I now use Butches Bore Shine. You may find one you wife likes better to smell.
#24
Works good though.
#26
I put a 209 conversion in my Knight LK93 about 5 years ago.
Should the flash channel on my Knight's BP be a 1/8" hole too?
I know i tried a 1/8" bit last time i looked at it and it looked clean but wasn't going to fit. I just assumed it was a smaller size.
Should the flash channel on my Knight's BP be a 1/8" hole too?
I know i tried a 1/8" bit last time i looked at it and it looked clean but wasn't going to fit. I just assumed it was a smaller size.
#27
I am sure that it is 1/8".... start with a smaller bit and work your way to the 1/8"
#29
Nontypical Buck
Thread Starter
Join Date: Dec 2009
Location: Yucca Valley,Ca
Posts: 2,496
After 30 shots yesterday with BH 209 there wasn't anything for the 1/8" bit to remove from my triumph B P. i soaked it in 50/50 mix of windex/vinegar, then used a pipe cleaner once it was soft, to remove the carbon.i will say it again, Ron's vinegar/ windex mix softens the carbon up a lot... Ron just uses windex with vinegar, i ad more vinegar to it myself...
#30
Nontypical Buck
Thread Starter
Join Date: Dec 2009
Location: Yucca Valley,Ca
Posts: 2,496