Coreys custom 260's
#1
Banned
Thread Starter
Join Date: Dec 2008
Location: Boncarbo,Colorado
Posts: 9,186
Coreys custom 260's
Corey sent me a bunch of his .452" 260gr cast bullets he makes. I tried them out today and really happy he sent them!
Shots 1 and 3 are touching. Shot 2 is the upper right hand shot. The other was an old shot on the bucket from when i was testing the powerbelt aerolites.
I THOUGHT i was shooting 100gr BH209 for this group.
But after getting more loaders with 100gr and shooting this, i knew i had screwed up and was shooting to much powder.
100gr BH209.
Remembering that i originally was going to shoot coreys 405gr .452's i had tubes filled with 80 and 90gr. Now that i knew what my mistake was i went and reloaded 3 tubes with 90gr BH209 and went out to try it. Bingo! Shot #2 is again on the far left. Not sure what thats all about but i'll get it in line.
"upper 3 shots"
I think the sabots were the mmp hph12 but corey will have to speak up on this as im not sure what they were. They loaded very nicely and i was able to start them with my thumb and then ram the bullets home with firm pressure. Kind of like loading a Thor.
Shots 1 and 3 are touching. Shot 2 is the upper right hand shot. The other was an old shot on the bucket from when i was testing the powerbelt aerolites.
I THOUGHT i was shooting 100gr BH209 for this group.
But after getting more loaders with 100gr and shooting this, i knew i had screwed up and was shooting to much powder.
100gr BH209.
Remembering that i originally was going to shoot coreys 405gr .452's i had tubes filled with 80 and 90gr. Now that i knew what my mistake was i went and reloaded 3 tubes with 90gr BH209 and went out to try it. Bingo! Shot #2 is again on the far left. Not sure what thats all about but i'll get it in line.
"upper 3 shots"
I think the sabots were the mmp hph12 but corey will have to speak up on this as im not sure what they were. They loaded very nicely and i was able to start them with my thumb and then ram the bullets home with firm pressure. Kind of like loading a Thor.
#3
the sabots I sent ya where the harvester 300+ gr smooth, I bought them for the 405's and the 312's, i did not like how they loaded in my gun, my knight likes loose sabots, but they almost went down by themself
#10
Those in a 300gr or with a 20-1 or #2 alloy should be a good performer. Softer lead is a bit more fussy in a sabot and more care needs to be taken when loading them. Soft lead in a sabot also tends to loosen just a tiny bit if its left loaded for long periods.
I prefer a bit of expansion but a good hard cast and a large metaplat will penetrate great on large game but still leave a hell of a wound channel.
I prefer a bit of expansion but a good hard cast and a large metaplat will penetrate great on large game but still leave a hell of a wound channel.