Accura primer fit
02-04-2010, 12:36 PM
#1
Fork Horn
Thread Starter
Join Date: Dec 2009
Location: L.I., NY moved to Leland NC
Posts: 347
Accura primer fit
Im doing some of the improvements to my Accura BP Ive been following here and had a question regarding how my primer sits in the BP. On my Traditions Pursuit the primer sits in snugly flush in the BP while on my Accura the primer is raised about 1/16 " and is loose compared to the Trad. the primer is a Fusion 209ml and its .300 high and .240 wide . do they all sit like this in the Accura BPs. ? click on to enlarge
02-05-2010, 02:53 PM
#5
Nontypical Buck
Join Date: Jan 2009
Location: Northern Chautauqua Co. N.Y.
Posts: 2,976
Yea, that's the way it is, just be careful if you prime in the dark when you close your action do it carefully to make sure the Primer does'nt fall out. It would really suck to have a shot as a nice Buck only to hear (CLICK) when you pull the trigger.
Also, I tried something new with My ACCURA, I Got some (rubber O-Rings) and put one behind the Primer, it helps reduce blow-back a-lot, but you only get to use the O-Ring one time.
Also some of the Primers are longer than others, some give you a tighter fit and less blowback.
(BP)
Also, I tried something new with My ACCURA, I Got some (rubber O-Rings) and put one behind the Primer, it helps reduce blow-back a-lot, but you only get to use the O-Ring one time.
Also some of the Primers are longer than others, some give you a tighter fit and less blowback.
(BP)
02-06-2010, 05:40 AM
#7
Nontypical Buck
Join Date: Jan 2009
Location: Northern Chautauqua Co. N.Y.
Posts: 2,976
