Accura primer fit
 

Im doing some of the improvements to my Accura BP Ive been following here and had a question regarding how my primer sits in the BP. On my Traditions Pursuit the primer sits in snugly flush in the BP while on my Accura the primer is raised about 1/16 " and is loose compared to the Trad. the primer is a Fusion 209ml and its .300 high and .240 wide . do they all sit like this in the Accura BPs. ? click on to enlarge

yep mine sits like that. its so u can get your finger nails in there and pull it out easily

Normal...keep shootin..

Thanks guys

Yea, that's the way it is, just be careful if you prime in the dark when you close your action do it carefully to make sure the Primer does'nt fall out. It would really suck to have a shot as a nice Buck only to hear (CLICK) when you pull the trigger.
Also, I tried something new with My ACCURA, I Got some (rubber O-Rings) and put one behind the Primer, it helps reduce blow-back a-lot, but you only get to use the O-Ring one time.
Also some of the Primers are longer than others, some give you a tighter fit and less blowback.
(BP)

Thanks BP I picked up some of the o rings yesterday waiting on my Lehigh vent liners to come..

Let me (us) know how the vent liners and o-rings work out for you, you should be pretty much blow-back free after that.
Good Luck!
(BP)