I wouldn't use windex. That would be introducing a new ingredient (soap plus whatever else is in there) and may change the characteristics of the powder. Might get you into trouble.

Id be interested in hearing the outcome of this also, why? I like to tinker and try to make my own copies of certain things not always successful. Be careful Im also a member of the as a teen blew myself up club fooling with explosives. good luck

first pellet is drying very quickly. I should be able to make a few of them today. Darn shame i could only find a 1 1/2" pvc pipe in the shop. sucks making one at a time.

next time in town i will pick up some supplies and make a "plunger" to compress the wet powder into a tight mold.

Use urine as the fluid, gives it more oxygen...

Windex is good for cleaning windows. I would leave the powder alone. If you pay as much as you did for it, I sure would not risk wasting it.

Alcohol might work, but APP is petroleum based sensitive.. might be a bad mix.

MD, just make sure somebody is filming this when you touch one off in the gun for the first time. I'm just sayin......

Found an alcohold swab so i put that at the powder end and let it sit for a bit to draw out the moisture. Pellet is drying by itself right now.

Great experiment going there Mountain Devil 54.

sorry for the dark picture, This is the first one. didnt come out as good as i had hoped but the one in the mold now looks perfect. I added to much water for this one. Thats 100gr.

The big one is a 100gr pellet. I pushed it out to soon and it was still fairly wet and i got a some small chunks on the side. They just need time to dry is all. I am working with a smaller 50gr pellet right now.



I need a tube thats at least 2 1/2 - 3" long so then i can pour the powder into it and then add a little water, this way it will be more consistent than mixing in a bowl and transferring it to the tube.

Also have to work on how much water is needed per 50-100gr powder.