Rings and Mounts
#3
RE: Rings and Mounts
jaybez101099
I am not sure you can get a Leupold style base for Encore-Omega-Triumph... because of the distance between mounts that TC uses I think you have to go with a Weaver style rail mount. The rail allows you to put the rings in different locations.
I have the rail system on my Omega and Triumph
This is probably the strongest base available - but you can find it less expensive in other online locations...
https://secure.tcarms.com/store/inde...3/prevstart/0/
Again not sure of the Leupold information...
I am not sure you can get a Leupold style base for Encore-Omega-Triumph... because of the distance between mounts that TC uses I think you have to go with a Weaver style rail mount. The rail allows you to put the rings in different locations.
I have the rail system on my Omega and Triumph
This is probably the strongest base available - but you can find it less expensive in other online locations...
https://secure.tcarms.com/store/inde...3/prevstart/0/
Again not sure of the Leupold information...
#4
Giant Nontypical
Join Date: Nov 2005
Posts: 6,585
RE: Rings and Mounts
jaybez101099
I have the weaver aluminium base and Warner steel rings on the Omega the Triumph and the Endeavor and if I pick up an other one I shall do more of the same.
A tip on replaceable accuracy mounting.
After mounting the base securely put the bottom of the ring on the base shoved all the way back in the notch toward the rear of the gun so recoil can not flex them then put the scope on then the top of the rings. Then if you find it necessary to take the scope off for any reason slide it back snug against the rear of the slots and you POI will remain the same. Lee
I have the weaver aluminium base and Warner steel rings on the Omega the Triumph and the Endeavor and if I pick up an other one I shall do more of the same.
A tip on replaceable accuracy mounting.
After mounting the base securely put the bottom of the ring on the base shoved all the way back in the notch toward the rear of the gun so recoil can not flex them then put the scope on then the top of the rings. Then if you find it necessary to take the scope off for any reason slide it back snug against the rear of the slots and you POI will remain the same. Lee
#5
Fork Horn
Join Date: Feb 2005
Location: Fair Haven, NJ
Posts: 146
RE: Rings and Mounts
Pretty sure the Omega, Encore and Triumph share the same scope mountings. I used to have the Weaver style 1 pc base and Warne Quick Detach low rings pictured here on my Omega:
They worked, but I prefer a lower mount. So I switched to the 1 pc Leupold base and dualdovetail low rings:
As already been said... the Weaver style has more options forscope placement.
They worked, but I prefer a lower mount. So I switched to the 1 pc Leupold base and dualdovetail low rings:
As already been said... the Weaver style has more options forscope placement.