The Break in has started: Target #2 a few[3] Hornady FPB to help clean up the rifling. I think it might like them. All these targets were shot at 100yds off the bench rest at Cleburn county range.
T#2 FBP- 90gr. BH- STS Rem 209

T#3-110gr BH-250gr SW-STS REM. 209 fired in 80 + degee with out any cooling period. It was 80 when I left home for the 5 minute drive to the range it was 91 when I got home just before lunch.

T#3-115gr BH- aw 250gr- STS 209- 3 minute cooling time between shots.
Trigger pull will have to be modified feels like about 8 pounds to much for me.

T#5 Could not resist trying my newest bullet, will proably shoot much better after break in and trigger mod. down to about 2 pounds.
Lehigh 250gr - 115 gr. BH - HPH24 sabot - STS209 2 minutes cooling time.

T#6 -Lehigh 250gr - 115gr BH - Short Black Harvester STS 209
I really feel the gun will shoot better after another 50 or so shots AND fixing the trigger; It really iritates me to have to rework the trigger on an $800 gun. And I truly feel if the trigger pull had been reasonale the groups would be much better. The day was bright and clear the wind was from the left at 12 miles an hour. Lee

Good shooting there Lee. Heck, even with a heavy trigger and hot barrel those last two groups are only a tad over one inch. I agree with you, it seems that manufacturers would make it a priority to get the trigger pull right - but they don't.

Nice shooting! Those are some great groups! Gotta love those Endeavors.

The endeavor will make a great ML after you make some tweaks. Very nice shooting.

I would say the tweak he needs is to sell his endeavor and buy a Triumph. What do you say Grouse?

Great shooting...especially #5 & 6.

Good luck with it!