Just noticed on my Wolf that the butt stock is loose. How to I tighten it up? There are 3 pins on the side where the trigger is, do I take those out, and then take the trigger mechanism out, to get to some kind of nut inside there, or what. Thanks.

They are lifetime garunteed, call cva.

You either remove the butt pad or the plastic piece thats screwed onto the grip of the stock. Dont take those pins out of the frame! That holds the guts of the trigger in place.

take thetwo screws out in the bottom of the butt plate, (the holes). Look up inside with a flash light you can see the bolt inside, you need a long extension to get in there. I tightened mine up also.
Doug

should be covered under warranty