Power Belt bullet skirts/found something new!!!
07-05-2006 | 12:16 AM
#11
Fork Horn
Joined: Feb 2006
Posts: 249
Likes: 0
From: Germantown , WI
RE: Power Belt bullet skirts/found something new!!!
The numbers are in the mold . By the way all plastic molds have them that way the bad cavity can be identified at the plant . If you look on anything plastic you will find them. On much bigger parts you can find the date code .
Sundowner
Sundowner
07-05-2006 | 08:33 AM
#12
Nontypical Buck
Joined: Jul 2003
Posts: 2,922
Likes: 0
RE: Power Belt bullet skirts/found something new!!!
ORIGINAL: chaz3815
The numbers are in the mold . By the way all plastic molds have them that way the bad cavity can be identified at the plant . If you look on anything plastic you will find them. On much bigger parts you can find the date code .
Sundowner
The numbers are in the mold . By the way all plastic molds have them that way the bad cavity can be identified at the plant . If you look on anything plastic you will find them. On much bigger parts you can find the date code .
Sundowner
If you are insistent to learn more, call Del Ramsey at MMPsabots.comfor a complete explanation on manufacturing& packaging.
07-05-2006 | 10:38 AM
#13
Joined: Feb 2003
Posts: 174
Likes: 0
From: Michigan USA
RE: Power Belt bullet skirts/found something new!!!
ORIGINAL: Triple Se7en
Products like this - with no need for the hi-lo driver to pull the oldest palletfirst, will often find a mixed-bag of production numbers inside. Stuff like this only gets rotated when the product gets an occasional update/revamp. The bin that these sabots may get dumped into - prior to packaging, may hold several boxes/bushels from past productions without product rotations needed.
If you are insistent to learn more, call Del Ramsey at MMPsabots.comfor a complete explanation on manufacturing& packaging.
ORIGINAL: chaz3815
The numbers are in the mold . By the way all plastic molds have them that way the bad cavity can be identified at the plant . If you look on anything plastic you will find them. On much bigger parts you can find the date code .
Sundowner
The numbers are in the mold . By the way all plastic molds have them that way the bad cavity can be identified at the plant . If you look on anything plastic you will find them. On much bigger parts you can find the date code .
Sundowner
If you are insistent to learn more, call Del Ramsey at MMPsabots.comfor a complete explanation on manufacturing& packaging.
Thread
Thread Starter
Forum
Replies
Last Post
arkansasbowhunter
Whitetail Deer Hunting
2
10-11-2003 08:57 AM
