The very first three shots (the ones that clocked 1920fps) were on the paper at 100 yards in a group that measured 7/8 inch center to center at the widest spread. I don't think I can do that all the time but it was the first experience with Black Mag'3 and without a swab between and the first shot was from a clean barrel so I was converted to Black Mag'3 pretty much from that time on.

Sounds real promising. Can't wait to get my hands on some Black Mag 3.

I posted awhile back on black mag allso , my results were very similar . It is the best powder I have used in my omega so far . It is way cleaner than t7 , but not totaly clean , a wet and dry patch are required between shots and some light white colored fowling will come out , like stated before , this is an easy clean , not like t7 , and its bad crud ring . The mag part is correct , as I started with 100 grains , and quickly went down to 90 , as recoil was pretty stout with 100 grains of blackmag , much harder than t7 . With 90 grains it calms down , hard to believe 10 grains makes that much diferance , but it definatly does . Accuracy was good , around an inch at 50 and 3 inches at 100 .I was useing 300 grain spitfires . Im going to give 250 grain powerbelts a try next , as these load wat easyer in my omega and seem to group better than any sabot bullet I have tryed yet .