Pyrodex Pellet Placement
09-08-2005 | 01:17 PM
#11
Nontypical Buck
Joined: Jul 2003
Posts: 2,922
Likes: 0
RE: Pyrodex Pellet Placement
ORIGINAL: skinnerdawg
pipe cleaner makes it easier to pull the pellets out and also keeps you from getting any oils onto the pellets themselves
pipe cleaner makes it easier to pull the pellets out and also keeps you from getting any oils onto the pellets themselves
Most times at the range, that box of pellets should not be seated next to you. You should only bring along the approximate number of pellets you may need at the range because of possible moisture contamination resulting in weather conditions for that particular day.
Alot of folks use thin long plastic tubes for pellet carriers.
09-09-2005 | 06:28 AM
#12
Giant Nontypical
Joined: Feb 2003
Posts: 6,270
Likes: 0
From: Texas - BUT NOW in Madison County, NY
RE: Pyrodex Pellet Placement
ORIGINAL: Hogwild61
When using 2 or more pellets, which end is best to put in first AND how should the following pellets be stacked?
When using 2 or more pellets, which end is best to put in first AND how should the following pellets be stacked?
09-09-2005 | 11:07 AM
#13
Guest
Posts: n/a
RE: Pyrodex Pellet Placement
Perhaps the material surrounding the metal inside the pipe cleaner is not conductive.... also the alloy may not be either.
I doubt Hodgdon wouldoffer a conductive solution to holding their pellets. Doesn't make sense!
I doubt Hodgdon wouldoffer a conductive solution to holding their pellets. Doesn't make sense!
