Here is somthing i have worked on today , i call it the tinker'ers log.This should be helpful for some and maybe a big help for other's to understand there setup , as we all do tend to forget some things at times and that includes writting them down.
Thought I did this in MSword i was unable to work the actual format too the forum.
Have Fun

BOW SETUP AFTER FINAL TUNING
HUNTING/TARGET

Date:_______________

Bow Weight:___________ Draw Length:____________

Arrow:__________________ Arrow Length:____________

Tip Weight:________ grains. Total Arrow Weight:_______grains.

F.O.C:______________ Rest Type:___________________

Nock Height From Top Of /Peep Height To Top Of
Top Axle:________________ Top Axle:____________________

Center Shot:_____________ Draw Module#: _______________

Axle To Axle Length:___________ Brace Height:____________

Top Tiller:____________________ Bottom tiller:_____________

MAKE:______________________ BOW SERIAL# _______________

Performance for this Setup :________%

SITE PINS:

Measure From The top inside pin guard to each pin:

SINGLEPIN SETUP: ________

3PIN SETUP:
10 YRDS:______ 20 YRDS:______ 30 YRDS:_____

4PIN SETUP:
10 YRDS:______ 20YRDS:______ 30YRDS:______ 40YRDS:______

NOTES
================================================== ====================