The Tinker'ers LOG
03-20-2005 | 09:11 AM
#1
Thread Starter
Joined: Feb 2003
Posts: 171
Likes: 0
From: Fulton N.Y. USA
The Tinker'ers LOG
Here is somthing i have worked on today , i call it the tinker'ers log
.This should be helpful for some and maybe a big help for other's to understand there setup , as we all do tend to forget some things at times and that includes writting them down.
Thought I did this in MSword i was unable to work the actual format too the forum.
Have Fun
BOW SETUP AFTER FINAL TUNING
HUNTING/TARGET
Date:_______________
Bow Weight:___________ Draw Length:____________
Arrow:__________________ Arrow Length:____________
Tip Weight:________ grains. Total Arrow Weight:_______grains.
F.O.C:______________ Rest Type:___________________
Nock Height From Top Of /Peep Height To Top Of
Top Axle:________________ Top Axle:____________________
Center Shot:_____________ Draw Module#: _______________
Axle To Axle Length:___________ Brace Height:____________
Top Tiller:____________________ Bottom tiller:_____________
MAKE:______________________ BOW SERIAL# _______________
Performance for this Setup :________%
SITE PINS:
Measure From The top inside pin guard to each pin:
SINGLEPIN SETUP: ________
3PIN SETUP:
10 YRDS:______ 20 YRDS:______ 30 YRDS:_____
4PIN SETUP:
10 YRDS:______ 20YRDS:______ 30YRDS:______ 40YRDS:______
NOTES
================================================== ====================
.This should be helpful for some and maybe a big help for other's to understand there setup , as we all do tend to forget some things at times and that includes writting them down. Thought I did this in MSword i was unable to work the actual format too the forum.
Have Fun
BOW SETUP AFTER FINAL TUNING
HUNTING/TARGET
Date:_______________
Bow Weight:___________ Draw Length:____________
Arrow:__________________ Arrow Length:____________
Tip Weight:________ grains. Total Arrow Weight:_______grains.
F.O.C:______________ Rest Type:___________________
Nock Height From Top Of /Peep Height To Top Of
Top Axle:________________ Top Axle:____________________
Center Shot:_____________ Draw Module#: _______________
Axle To Axle Length:___________ Brace Height:____________
Top Tiller:____________________ Bottom tiller:_____________
MAKE:______________________ BOW SERIAL# _______________
Performance for this Setup :________%
SITE PINS:
Measure From The top inside pin guard to each pin:
SINGLEPIN SETUP: ________
3PIN SETUP:
10 YRDS:______ 20 YRDS:______ 30 YRDS:_____
4PIN SETUP:
10 YRDS:______ 20YRDS:______ 30YRDS:______ 40YRDS:______
NOTES
================================================== ====================
03-20-2005 | 03:17 PM
#3
Giant Nontypical
Joined: Feb 2003
Posts: 5,525
Likes: 0
From: creemore Ontario Canada
RE: The Tinker'ers LOG
Mr Bill !
Thank's for the idea and I'm sure this will come in very very handy.I've just printed off a few copies myself ,certainly do appreciate it .
Thank's
nubo
Thank's for the idea and I'm sure this will come in very very handy.I've just printed off a few copies myself ,certainly do appreciate it .
Thank's
nubo
03-20-2005 | 03:29 PM
#4
Nontypical Buck
Joined: Jul 2004
Posts: 4,640
Likes: 0
From: Roodhouse Illinois
RE: The Tinker'ers LOG
Well...when I get my bow back to together, after a little maintence, didn't NEED it, but I figured, what the heck, might as well...anyways...after I get it back together I will have to right all this down..It will help alot I think. THANKS! 
