CG,
I just put my Kwikee Kwiver on with no problems. I ran some longer bolts through the quiver mount, through the spacers,and then through the sight mount holes themselves, rather than using the separate quiver mounting holes. In other words, the quiver mounting bolts also mount the sight to the bow. This is how my old sight was attached, and worked well. Don't worry that the holes in the sight are countersunk. The spacers will self-align in the center of the hole. If the spacers are too long, they should be able to be easily sanded down, or you could cut your own from some plastic tubing to any length that you need. I hope all of this made sense. It's not as complicated as I made it sound.
Good luck,
Charlie

Edited by - Trebark on 05/27/2002 07:30:37