ORIGINAL: muzzyman88
Slim, not to pick on you or anything, but one statement stands out to me...
The bow is very accurate, however it seems to change windage overnight. I will shoot about 6-8'' groups at 65 yards one day and the next I will put that same group 6-8'' to the right or left of the center.
Unless your sight or rest is coming loose, this sounds more like an inconsistant form issue. I'll get a day or so like that where I hit more the left side or right side of my aiming point and its almost always me getting lazy on form.
On the bow note you have quite a handful of good bows there. My advice would be to shoot them all until you find which feels best to you. I personally shoot an Xtec and really like it. Being that you're a finger shooter a longer ATA bow would be a better fit for you. The Xtec is 35 1/2" ATA. You may want to take a look at either the ProTec or the UltraTec if you're looking for more added length.
Oh, and don't foget brace height. The Xtec, Ultratec, and the Protec are 7"+ in the catagory too.
Don't get hung up on one brand though. Bowtech is coming up with a lineup that has a couple bows in it that would do you nicely as well.
Be patient and shop around, shoot em all, then decide.
What does brace height mean? What is the advantage of a longer brace height? Stability?
Also, what does Reflex Geometry mean?
You said to look at the ProTec as an additional option. That's my number 2 choice. I do like the longer ATA length, but remember I am not shooting fingers with any new bow I buy. I will definately shoot a release.
So you don't think finger torque could play a role in the inconsistancy?