Recently bought the QAD Ultra rest and had it installed on my bow. The pro shop said that the cock vane should go in the up position for this rest, and he paper tuned the bow. I shot it before I left and noticed one of the vanes were just touching the cable. He told me that it paper tuned ok and shouldn't be a problem. While shooting the arrows appeared to fly straight and true. All of that and now the problem, the vanes are starting to wrinkle along the edges and I'm not sure if it's cable contact or actually hitting the rest.

I've tried turning the nocks a little so that the vanes weren't hitting the cable, but I'm wondering if there's another problem.

This is the first drop away rest I've ever used and there may not be any problems. Just doesn't seem right for the vanes to wrinkle.

I should mention that the rest is on a Bow Tech Stalker, 32" draw and 63lbs.

Thanks
Tom