ORIGINAL: extreme1
I went to my dealers tonight to pick up my patriot,and i am very pleased with it.I set it up with a copper john dead nuts site and a nap 1000 pro.Its a 70 lb version with 29 in mod.Only problem is i need a 28 inch draw.I know i can set the draw stop to get 28. 5 inch draw at 65% let off but i have no idea where to set it.I haven't got the manual with the bow.If anyone has the manual can they please let me know.I know the draw is a half inch longer then what i am used to but will give it a try.I know i can order in a 28 inch mod and fix the problem real quick,but want to play with it a bit.I shot the bow tonight at 29 in and it didn't feel to bad but it didn't have a peep installed.Thanx for any advice and help.
Jason,
If you can tell me what draw length and let off you desire I'll give you the module number and draw stop location you'll need.
You need to be careful not to set the draw stop too far towards the "L" end of the cam as it can cause the cam to over rotate and may damage the harness.
Please e-mail me at
[email protected]
Regards, Pat