nubo,

I have lifted the rest and dropped it and it is not obstructed at all.

The cord goes from my TT to the cable slide. There is a little slack, not much at all. This allows the rest to raise to the full position about 1-1/2" from the backwall!

I don't think that I have had the contact problem the whole time. After originally setting it up, we paper tuned and there was no indication of fletch contact, as I was getting perfect bullet holes an the arrow flight looked good! Right now the flight looks okay, there is just a slightly tighter wobble in the front with the back spinning in a bigger circle! If there was contac the whole time, it should have showed up in the paper tuning! I don't know what changed this, nothing came loose, I mean, I could have had the contact, but I don't see why it wouldn't have showed up while paper tuning and why the arrow flight looked good then.

Tommorow I am gonna spend the day tinkering around with the rest a bit, seeing if I can fix it. If not, I am not sure what I am going to do. I don't know if tieing it into the buss cable will help, and I don't want to go through that hassle if it isn't going to fix the problem. I really would like to shoot a drop away on this bow, and there are a few others that I really like, the N.A.P. QuickTune 4000 and the Muzzy Zero Effect, but I am just worried about dropping cash on another rest to have the same problem. Who knows what tommorow will bring though, hopefully I can get this all situated!!!!!