The Patriots are Backwards to a Renegade/Hawken, The Front Trigger on the Patriots is to “Set” and the Rear trigger is the Pull. You Cock the Hammer, then Pull the Front trigger to “Set” the Rear (Make the Pull lighter)

i bet the Set trigger adjustment is out of Wack? The little Screw between the Triggers. With the Hammer all the Way down on the nipple, Pull the Front “Set” Trigger, does it Hold, or not? If not, Back the Little Screw Between the Triggers off (Counter Clockwise) About 1 full Turn, Now try and Pull the Front Trigger to “Set” it, it Should hold now, if not Keep Backing the Little set Screw out until it Holds.

Once you get the “Set” to Hold, Keep the Hammer in the lowered Position, Pull the Front Trigger til it Clicks “Sets” Now Slowly turn the little adjustment Screw in (Clockwise) Until it Releases, Take note of where the Screw driver is Oriented when it Releases, Now back the Adjustment Set Screw off (Counter Clockwise) 1 Full turn. I like a 1/2 Turn, But i am VERY adapted to really light triggers.

After reading the above, If you stil don’t understand this, Send me a PM with a Number and i can Walk you Through it.