HuntingNet.com Forums - View Single Post - revamped T/C 7194 tang sight
Thread: revamped T/C 7194 tang sight
View Single Post
Old 01-06-2019, 07:13 PM
  #8  
Idaholewis
Fork Horn
 
Idaholewis's Avatar
 
Join Date: Mar 2016
Location: North Idaho
Posts: 422
Default
Originally Posted by bronko22000
I'm not really sure about the Seneca and Cherokee. But I don't see a problem with using the 7194 on one. You likely could still attach it using the top tang screw and drill and tap the tang for the rear hole. Only thing is the base of the sight might be a bit wider then the tang itself. You would have to do that anyway if you have a newer Hawken or Rene because they stopped putting a 3rd hole in the tang.
I'd really like to know what the difference is between the 7196 and 7194
The 7196 is Scaled down quite a bit, Very narrow at the Tang, The Seneca/Cherokee rifles have a really narrow Tang. Everything about the Seneca and Cherokee Rifles are Scaled down, Basically Scaled down Versions of the TC Hawken (Seneca) And Renegade (Cherokee) The 7196 Mounts in the Front Tang hole of the Seneca, unlike all other TC’s that use the Rear Tang Hole

this is 1 of my .36 Cal Seneca’s


Attached Images    
Idaholewis is offline  
Reply