Originally Posted by
cayugad
On some of those GMB's when you try to put them in a Renegade stock they don't quite fit because the thimble rig is too long. It is necessary to take a dremel tool and cut just a small section of that thimble rib off. Or you can take and cut a chuck of stock off the rifle. But I did the thimble rib. If its a GMB drop in type it will fit that Renegade Stock.
thanks for suggestion I already looked there and
the thimble has plenty room on this one and I notched the stock bout 1/16 more making sure under rib is clearing also its in the tang/ breech hook that is binding I can loosen the tang screws and let back come up a little and it will go . think I am going to have cut a grove in the back side of tang or file a bit off of the hook breach so it wont raise up on tang and level up with the top then may need the gray tape on bottom .. think cutting a 1/8 grove on bottom of tang let the hook up a little prolly best fix.