HuntingNet.com Forums - View Single Post - Rust on my Rem. mnt. rifle stainless ?
View Single Post
Old 11-26-2003 | 03:57 AM
  #3  
popumm
Spike
 
Joined: Feb 2003
Posts: 45
Likes: 0
From: whitemarsh,md.
Default RE: Rust on my Rem. mnt. rifle stainless ?

rusty,Is this the 1st time you have dropped the hammer this year? If I might rcmd. pull the bolt and remove the firing pin and clean the bolt and firing pin then use very little lube.I have seen this at the range with Rem.semi rifles,has a slight inprint on the primer.After cleaning the action for the club member she was fine.If the weather gets very cold dont use any lube inside the bolt or the firing pin will bind up and then " click" . Our season opens this Sat. and from what I saw 10 days ago the bucks are running the does big time.Good luck.
popumm is offline  
Reply