A few suggestions if you haven't tried: 1)check your batteries, preferably with a digital meter. Any one battery reading 1.0 to 1.2 volts, the camera will not function properly or not at all. 2) reformat your card in the computer. 3)check to make sure your camera recognizes the card (that is the GB is not too high). Try either a different card or different brand of card. Here are some good brands: SanDisk, Verbatim, Adapta and Lexar with SanDisk being recommended by many camera companies. I am not familiar with that brand of camera, but some cameras have a reset button (some Moultrie which has a slide out battery tray. The button for the Moultrie is seen after removing the tray).
Another thing that can upset a camera function is either installing or removing the SD card or batteries with the camera turned on.
The best of luck.