I bought a used Reflex Denali about a year ago and recently had a guy at the local bow shop a new string and cable on the bow. He made them but I don' t remember the material he used. Anyhow, the draw range on the bow is supposed to be 60-70 lbs and I was shooting 67 lbs, but now with the limb bolts cranked all the way down, I can only get 62 lbs out of it. The reason I took the bow in in the first place is that I noticed the ATA was 1/2 longer then specs and the brace height was shorter than it should have been. So I suspected string and cable stretch and the guy at the shop agreed. After I got home I measured the ATA and it was still long, so I put the bow in my press and twisted the string (not the cable) a few times and got it close to 34" but it was still about 3/16 longer than it should have been. I' m not sure if any of this is a big deal or not but would like to know why I can' t get 70 lbs out of it any more. Any ideas/suggestions would be appreciated. Thanks.