I forgot the cast bullets I was going to shoot the last time out. remembered them this time. needless to say I should just forgot them again.

only shot 10, both sets where with wads. thinner felt and the other was a think felt. all over the place. they bullets where beyond slip fit. if it was not for the lube they would of slide right down the bore. did not have any key holes

the other bullet I shot was a lee 452-250 (dropping at 260gr and sized to 451) with a harverster smooth side sabot. only got to shot 5. storms moved in.

all charges where 60grs of t7 3f, and cci mag #11

also took my nagant out to sight it in with milsurp 147gr ball.

spread on the target 501, upright, 4 rounds of 7.62x54r (put on in the big hole made by the .501 bullet), 3 shots center where the lee 452-250 w/harvester smooth sides. had a really bad flinching problem today. don't know if I was just tired from remolding to 1am then being at work at 6am. but I am going to throw the other two rounds out that was part of the set.



only thing I left today was a hammer to drive my target stand into the ground. thank god for rocks