First thing is to get the crud that T/C applies to there barrels for protection out lol. a good quality bore cleaner and a synthetic brush and lots of patches.a bore polish may still be needed even after the cleaning.powders to use would be 777 loose 2f, swab between shots and even better BH209, no swabbing between shots, 90- 110 gr of either.bullets and sabot choices would be. .250 gr gold dot Crushed rib sabot,.250 gr Barnes TEZ/ with supplied sabot,harvester .260 gr pt gold supplied sabot or the .250 gr XTP with a crushed rib sabot.if your not familiar with loading, cleaning a muzzle loader,you need to do some searches and ask a lot of questions so you get it right..most here are more than willing to steer you in the right direction.. have fun and be safe..