Originally Posted by
flounder33
The problem is that when the primer is seated it is too far away from the firing pin. I get a slight indent but not enough of a blow to set it off every time. Maybe my gun is too clean or maybe when you wrap your breech plug with tape like you do it sticks out further.
Art
This should not be the case... if you are only getting a slight dimple it is the reach of the hammer... and also if you were to use a Knight BP it would not dimple at all as the Knight BP is shorter than a Lehigh.
Do you have another Knight bolt in the house you could try?
I will try to get a picture to show you what it might look like with out the adapter...
Give me a few minutes.....